3. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Remove two 2.5mm Japanese Industrial Standard (J) screws with the J00 bit located on the small circuit board in view. |
|---|---|
| - | [* black] Use jimmy to remove board after screws have been removed. Be careful not to crease or damage the ribbon cable. |
| + | [* red] Remove two 2.5mm Japanese Industrial Standard (J) screws with the J00 bit located on the small circuit board in view. |
| + | [* black] Use the Jimmy to remove the board after the screws have been removed. |
| + | [* icon_caution] Be careful not to crease or damage the ribbon cable. |