HP Sprocket 2-in-1 Outer Casing Replacement 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Taha Ziad — 18 Mar 2019

Düzenleme onaylandı tarafından Taha Ziad

-	[* black] Remove two 2.5mm ~~Phillips head~~ screws with the J100 bit. Located on the translucent, plastic bracket.
+	[* black] Remove two 2.5mm Japanese Industrial Standard (J) screws with the J100 bit. Located on the translucent, plastic bracket.
	[* icon_caution] One will be located beneath the ribbon cable.
	[* black] Remove translucent, plastic bracket by hand.