Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the screw cover located on the bottom of the zune.
[* black] Stick a small flat head screw driver in one side of dock screw cover and gently ease upit out. Do the same on the other side until it's worked free.
[* black] Stick a small flat head screw driver in one side of dock screw cover and gently ease upit out. Do the same on the other side until it's worked free.
[* icon_caution] Warning: This is a brittle piece of plastic that will break if forced.
[* red] There should beOnce removed, two 2.6mm screws of size 2.6 mm on the bottom of the Zuneare exposed.
[* red] There should beOnce removed, two 2.6mm screws of size 2.6 mm on the bottom of the Zuneare exposed.