Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Adrian Szydlowski —

Düzenleme onaylandı tarafından Adrian Szydlowski

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* blackred] Remove the plastic screw cover located on the bottom of the device. Insert a small flat-headed screwdriver into one side of the cover and gently ease it out. Repeat on the other side.
[* blackred] Remove the plastic screw cover located on the bottom of the device. Insert a small flat-headed screwdriver into one side of the cover and gently ease it out. Repeat on the other side.
[* icon_note] Be gentle when removing the screw cover as it is brittle and will break if forced.
[* redorange] You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.
[* redorange] You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.