Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

8. Adımdaki Değişiklikler

Düzenleyen: Dominik Schnabelrauch

Düzenleme onaylandı tarafından Dominik Schnabelrauch

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] The adhesive that holds down the logic board is very strong. It's possible to remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage during the removal procedure we recommend both.
[*
black] Apply some solvent in a [guide|25705|heatedseamless movement along the long edges of the logic board. Allow it to penetrate the adhesive for several minutes.
[* black] [guide|25705|Prepare an
iOpener|new_window=true] and apply it to the logic board to loosen the adhesive beneath. Apply the iOpener for at least two minutes.
[* icon_caution] The adhesive that holds down the logic board is very strong. It's possible to remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage during the removal procedure we recommend both.
[*
black] Apply some solvent in a [guide|25705|heatedseamless movement along the long edges of the logic board. Allow it to penetrate the adhesive for several minutes.
[* black] [guide|25705|Prepare an
iOpener|new_window=true] and apply it to the logic board to loosen the adhesive beneath. Apply the iOpener for at least two minutes.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi