Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

8. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_cautionicon_note] The adhesive that holds down the logic board is very strong. It's possible toTo remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage duringboard, you must first weaken the removal procedure we recommendadhesive using botheither a solvent, or heat.
[* icon_caution] '''Many glue solvents (such as isopropyl alcohol) are flammable''', so don't mix these methods
.
[* icon_cautionicon_note] The adhesive that holds down the logic board is very strong. It's possible toTo remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage duringboard, you must first weaken the removal procedure we recommendadhesive using botheither a solvent, or heat.
[* icon_caution] '''Many glue solvents (such as isopropyl alcohol) are flammable''', so don't mix these methods
.
[* black] Apply some solvent in a seamless movement along both edges of the logic board. Allow it to penetrate the adhesive for several minutes.
[* black] Meanwhile [guide|25705|prepare an iOpener|new_window=true] and apply it for at least 2 minutes on the logic board to loosen the adhesive beneath.

Resim 3

Silindi