Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

11. Adımdaki Değişiklikler

Düzenleyen: Tobias Isakeit

Düzenleme onaylandı tarafından Tobias Isakeit

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing.
[* icon_note] In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown herein the last two images:
[* icon_note] In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown herein the last two images:
[* red] Adhesive
[* orange] Smart Connector cable