6. Adımdaki Değişiklikler
Düzenleyen: Julien Mindlin-Davidson —
Düzenleme onaylandı tarafından Julien Mindlin-Davidson
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Two ribbon cables need to be removed before separating the two halves of the camera. | |
| [* black] Using a flat object, pry open the black tabs above the ribbon cable connectors by gently pulling away from the motherboard. | |
| [* icon_note] A 1.0 flat head screwdriver is recommended, but any equally small and flat object will work. | |
| - | [* icon_caution] Ribbon cables are fragile, put as little stress on them as possible. |
| + | [* icon_caution] Ribbon cables are fragile, so put as little stress on them as possible. |