Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

7. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Carefully line up the rear camera bezel with the cutouts on the rear glass. With the bezel's adhesive side facing the glass, set the bezel down on the glass so that the camera lens cover sits in its cutout in the glass.
[* black] Make sure the camera lens cover is completely seated in the rear glass' camera cutout so that the bezel lays flat against the glass.
[* black] Use your fingers to apply even pressure to the bezel for 30 seconds to make sure the adhesive bonds properly.
[* black] ImmediatelyRight before you install the rear glass and seal the phone, peel off the blackblue backing covering the camera glass.
[* black] ImmediatelyRight before you install the rear glass and seal the phone, peel off the blackblue backing covering the camera glass.