Google Pixel 3a Teardown 11 No'lu Adım Geçmişi

11. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon — 9 May 2019

Düzenleme onaylandı tarafından Taylor Dixon

	[* black] After the motherboard, there isn't much left in the barrel. That's not a bad thing, especially when each part comes out easily in one piece.
	[* black] First we fish out the fingerprint sensor, complete with its wavy ~~tail~~ flex cable.
	[* black] Next to come out are the plastic rails, serving dual-purpose as wire routers and brackets which press the squeeze sensors in place.
	[* icon_note] Image 111 is an alternative option. It shows the squeeze sensor more.
	[* black] Down at the bottom edge of the phone we find a modular USB-C connector! This is a welcome design, especially when the 3a does not have wireless charging.
	[* black] Not pictured: the headphone jack also makes a cool modular comeback. (We have a shot taken for this which could be linked in as desired)
-	[* black] Down south we also spot the vibration motor, a ~~throwback to the~~ round ~~pucks of the first-generation~~ ~~Pixels~~. No fancy [guide\|113656\|precision haptic motor\|stepid=217260\|new_window=true] for this Pixel.
+	[* black] Down south we also spot the vibration motor—a small, round LRA (''Linear Resonant Actuator'') as found in just about every smartphone not made by Apple or Google. No fancy [guide\|113656\|precision haptic motor\|stepid=217260\|new_window=true] for this Pixel.