Bu Adımdaki Değişiklikler
Düzenleyen: Shea Charkowsky —
Düzenleme onaylandı tarafından Shea Charkowsky
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] [V1] First, remove the back cover to expose the components of the laptop. To do this, locate the screw locations and remove each using a T5 screwdriver. Once all of the screws are removed, carefully remove the back cover. |
|---|---|
| - | [* black] [V2] [Close the laptop and place it face down with the hinge away from you.] |
| - | [* black] [Remove the five screws holding the bottom cover to the laptop using a T5 screwdriver.] |
| - | [* icon_note] [Note that the screw near the center of the hinge is smaller than the other four.] |
| - | [* black] [Separate the bottom cover from the laptop, starting from the hinge and working your way around the edge.] |
| - | [* icon_note] [The plastic fastening may make cracking sounds when separating, but this is normal.] |
| + | [* red] Locate and remove the five screws holding the bottom cover to the laptop using a T5 screwdriver. |
| + | [* icon_note] Note that the screw near the center of the hinge is smaller than the other four. |
| + | [* black] Separate the bottom cover from the laptop, starting from the hinge and working your way around the edge. |
| + | [* icon_note] The plastic fastening may make cracking sounds when separating, but this is normal. |