4. Adımdaki Değişiklikler
Düzenleyen: Chrissy Robins —
Düzenleme onaylandı tarafından Chrissy Robins
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Use a heat gun or hair dryer and heat the phone until it is too hot to touch to soften the adhesive |
|---|---|
| [* black] Take a thin metal pry tool and slide it under the glass after the adhesive has been softened | |
| [* black] Place cards under the glass after lifting with the pry tool so that it won't re-adhere to the frame again | |
| [* icon_caution] Make sure the not to touch the LCD edge underneath the glass layer with the metal pry tool or the cards. This can damage the ribbon cables underneath and compromise the structural integrity of the phone itself |