Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Mason Herron —

Düzenleme onaylandı tarafından Thomas

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Unplug Battery Connection
-[* black] Allow 10-15 minutes for the residual voltage to drain from the PCM after disconnecting the battery cable.
-[* black] ***Note: ***This is because electronic throttle bodies utilize a ‘sweep’ function that opens and closes the butterfly inside on occasion, and due to the large gear reduction, here is enough force to seriously injure/remove fingers if it were to perform a sweep while a finger was inside of the throttle body.
+[* black] Using the 10mm socket, loosen the 10mm bolt that holds the battery terminal on to the battery.
+[* black] Be sure to push the cable far enough out of the way so it does not make accidental connection while doing additional steps.