Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Thomas

Düzenleme onaylandı tarafından Thomas

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Drain PCM
+[* black] Allow 10-15 minutes for the residual voltage to drain from the PCM after disconnecting the battery cable. This is due to the large gear reduction in the throttle body. There is enough force to seriously injure/remove fingers if it were to perform a sweep while a finger was inside of the throttle body.