Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Take note of the two seams on the phone:
+ [* red] ''Screen seam: ''This seam separates the screen from the rest of the phone. This is where you should pry.
+ [* orange] ''Frame seam: ''This is where the plastic frame meets the back cover. It is held in place by screws. ***Do not pry at this seam.***
+[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the ***right edge*** of the display for a minute.
+ [* icon_note] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi