Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon

Düzenleme onaylandı tarafından Taylor Dixon

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_note] This step shows how to insert the pick without damaging the LCD panel. Do this before you slice either long edges of the phone.
[* black] With the pick 1 mm in the gap, pivot the pick upwards to a steep angle.
[* black] At this angle, carefully push the pick into the gap about 1/4" (6 mm). The pick should slide in '''below the LCDOLED panel.'''
[* black] At this angle, carefully push the pick into the gap about 1/4" (6 mm). The pick should slide in '''below the LCDOLED panel.'''
[* icon_caution] '''Stop if you feel the point of the pick hitting a ridge.''' The pick may be pressing against the edge of the LCD panel. Angle the pick and try again.