4. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_note] This step shows how to insert the pick without damaging the |
|---|---|
| + | [* icon_note] This step shows how to insert the pick without damaging the OLED panel. Do this before you slice either long edges of the phone. |
| [* black] With the pick 1 mm in the gap, pivot the pick upwards to a steep angle. | |
| [* black] At this angle, carefully push the pick into the gap about 1/4" (6 mm). The pick should slide in ***below the OLED panel.*** | |
| - | [* icon_caution] ***Stop if you feel the point of the pick hitting a ridge.*** The pick may be pressing against the edge of the |
| + | [* icon_caution] ***Stop if you feel the point of the pick hitting a ridge.*** The pick may be pressing against the edge of the OLED panel. Angle the pick and try again. |