5. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_reminder] This step shows how to reconnect the light sensor. |
|---|---|
| + | [* black] Align the top edge of the plastic midframe with the phone. |
| + | [* black] Use the point of a spudger to carefully align and push the light sensor connector onto the motherboard socket. |
| + | [* icon_note] This takes a bit of patience and finesse. Once you have the connector in place, you can use a finger to gently press the connector onto the socket. |
| + | [* black] Alternatively, you can remove the light sensor from the midframe to reattach it to the motherboard first. |
| + | [* black] Use the point of a spudger to carefully pry the light sensor out of its recess on the midframe. The sensor is lightly adhered to the midframe. |
| + | [* black] Remove the sensor from the midframe. Attach the sensor connector onto its motherboard socket. |
| + | [* black] Thread the sensor cable through the midframe and reposition the sensor in the recess. Press down with your finger to adhere the sensor back onto the midframe. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi