Google Pixel 3a Plastic Midframe Replacement 5 No'lu Adım Geçmişi

5. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 24 Haz 2019

Düzenleme onaylandı tarafından Arthur Shi

	[* icon_reminder] This step shows how to reconnect the light sensor.
	[* black] Align the top edge of the plastic midframe with the phone.
	[* black] Use the point of a spudger to carefully align and push the light sensor connector onto the motherboard socket.
	[* icon_note] This takes a bit of patience and finesse. Once you have the connector in place, you can use a finger to gently press the connector onto the socket.
	[* black] Alternatively, you can remove the light sensor from the midframe to reattach it to the motherboard first.
	[* black] Use the point of a spudger to carefully pry the light sensor out of its recess on the midframe. The sensor is lightly adhered to the midframe.
-	[* black] Remove the sensor from the midframe. Attach the sensor connector onto its motherboard socket.
-	[* black] Thread the sensor cable through the midframe and reposition the sensor in the recess. Press down with your finger to adhere the sensor back onto the midframe.
+	[* black] Remove the sensor from the midframe. [https://d3nevzfk7ii3be.cloudfront.net/igi/lE5YBw3LflVRxTjG.large\|Attach the sensor connector onto its motherboard socket\|new_window=true].
+	[* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/1vcrYSEWX5UCjU3y.large\|Thread the sensor cable through the midframe\|new_window=true] and reposition the sensor in the recess. Press down with your finger to adhere the sensor back onto the midframe.