Eşyalarını Tamir Et Topluluk Mağaza

5. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon —

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_reminder] This step shows how to reconnect the light sensor during re-assembly.
[* black] Align the top edge of the plastic midframe with the phone.
[* black] Use the point of a spudger to carefully align and push the light sensor connector onto the motherboard socket.
- [* icon_note] This takes a bit of patience and finesse. Once you have the connector in place, you can use a finger to gently press the connector onto the socket.
-[* black] Alternatively, you can remove the light sensor from the midframe to reattach it to the motherboard first.
+ [* black] This takes a bit of patience and finesse. Once you have the connector in place, you can also use a finger to gently press the connector onto the socket.
+[* icon_note] Alternatively, you can remove the light sensor from the midframe to reattach it to the motherboard first.
[* black] Use the point of a spudger to carefully pry the light sensor out of its recess on the midframe. The sensor is lightly adhered to the midframe.
[* black] Remove the sensor from the midframe. [https://d3nevzfk7ii3be.cloudfront.net/igi/lE5YBw3LflVRxTjG.large|Attach the sensor connector onto its motherboard socket|new_window=true].
[* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/1vcrYSEWX5UCjU3y.large|Thread the sensor cable through the midframe|new_window=true] and reposition the sensor in the recess. Press down with your finger to adhere the sensor back onto the midframe.