1. Adımdaki Değişiklikler
Düzenleyen: Andrew Optimus Goldheart —
- Silindi
- Eklendi
- Değiştirilmemiş
Adım Satırları
[* blue] The button sensor pad ribbon cable is attached with a small clamp to the bottom left corner of the logic board. |
[* green] Use a small flathead screwdriver to lift the brown clasp and remove the ribbon cable. (clamp is shown lifted in second picture) |
[* green] Use a small flathead screwdriver to lift the brown clasp and remove the ribbon cable. (clamp is shown lifted in second picture) |