Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Justin Hall

Düzenleme onaylandı tarafından Justin Hall

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Now that the old wobbly jack is out, pull the rest of the wires through the hole in the frame.
[* black] Then feed the wires of the new jack through that same hole.
[* black] The new jack should go in easier than the old one came out. Make sure it is aligned the same as the old one with the wires going away from the screen, and snap it in.
[* black] Then put that metal cover back over it and place the metalshort wire with the ring terminal on top of that, then re-install the screw through that connector and tighten it down.
[* black] Then put that metal cover back over it and place the metalshort wire with the ring terminal on top of that, then re-install the screw through that connector and tighten it down.

Resim 2

Önceki resim yok

Eklendi