Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

6. Adımdaki Değişiklikler

Düzenleyen: Justin Hall

Düzenleme onaylandı tarafından Justin Hall


Adım Satırları

[* black] Now carefully snap the speaker grill back into place and flip the laptop back over onto its back and take the wires from the dc jack and route them the same way the old one was.
[* black] Then reconnect the plug with two red wires and two black wires and push it all the way in.
[* black] Now take the back cover and slip it over the eSata port, HDMI, and VGA, and snap it back down.
[* black] Now re-install a screw in each corner loosely and make sure all the edges are down and the switches work. If everything looks good finish putting everything back together in the reverse way we took it apart.
[* black] Now turn on the laptop and make sure everything works then plug in the charger cord and feel that nice tight snap and a gratifying orange charge light on the front. Then pat yourself on the back, you are done!