1. Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Engage the hub lock pins |
|---|---|
| [* black] Make sure that both ignition switches are turned to the off position. There is one on the engine and one on the control panel. | |
| [* black] Pull the ring near one of the wheel hubs straight out, away from the wheel. | |
| [* black] Rotate it so that the small roll pin lines up with its slot. | |
| [* black] Release the ring so that the lock pin slides into the wheel. You may need to rotate the wheels a little before the lock pin fully engages. | |
| [* icon_note] With the pin engaged, it should be very hard to turn the wheels. | |
| [* black] Repeat this step so that the lock pins on both wheels are engaged. |