7. Adımdaki Değişiklikler
Düzenleyen: Emily Parcell —
Düzenleme onaylandı tarafından Emily Parcell
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Place the battery and wires back into the casing (in reverse order that they were taken out), secure motherboard in clips, and screw motherboard back into casing |
|---|---|
| - | [* icon_caution] Be sure to screw in the motherboard. The screen may stick itself to the motherboard before you put the screw back. DO NOT FORGET THIS STEP! |
| - | [* black] Push screen onto motherboard to secure adhesive |
| + | [* black] Repeat steps 3-5 in reverse order. |
| + | [* icon_note] The screen may have reattached itself, preventing you from completing step three (securing the motherboard). If so, repeat step 2 and then proceed to step 3. |
| + | [* icon_note] You will need to lightly press down on the motherboard while screwing it in, or it will not make contact. |
| + | [* black] To reattach the screen, line it up to the metal outline and gently press it down. You may want to clean the screen with a cloth to remove any dust or fingerprints before proceeding to the next step. |