Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Emily Parcell

Düzenleme onaylandı tarafından Emily Parcell

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use tweezers to lift up edge of screen that is NOT attached to the film.
-[* icon_note] There is a slight bit of adhesive holding down the screen that will need to be peeled back
-[* icon_caution] Do NOT lift the end of the screen attached to the film
+[* black] The screen is partially attached to the motherboard with adhesive, so gently slide the tweezers underneath the screen to detach it, then lift it up.
+[* icon_note] The screen is made out of thin glass, so be sure to ___________.
+[* icon_caution] After this step, the screen should still be connected to the motherboard through a small black hinge. This piece should NOT be removed/cut.