Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: iRobot —

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Prepare the surface
[* icon_note] To ensure a good adhesive bond, both your device and part need to be thoroughly cleaned. This may take some time, but the results are worth the effort.
-[* black] Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or tweezers.
+[* black] Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or [product|IF145-020|tweezers].
[* icon_caution] Don't use metal tools if you're cleaning display panels or glass covers, as the tools may scratch the surface.
[* black] Use adhesive remover or isopropyl alcohol (>70%) to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.
[* icon_note] While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning.
[* icon_note] Allow the alcohol to completely evaporate from the device before reassembly.