Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Apply the adhesive
+[* icon_note] ***Generally, adhesives strips are backed with a clear liner and a colored liner***. The clear liner is easier to peel and should be removed first.
+[* icon_note] ***The adhesive that is exposed when peeling the clear liner determines which surface the strip should be applied to first.*** Locate the surface that aligns with the exposed adhesive.
+ [* black] To make adhesive application easier, you can align an unexposed strip to its intended position on the phone, [https://d3nevzfk7ii3be.cloudfront.net/igi/a6EfdSi3YTRDsMVw.large|then tape one edge down to hold the strip in place|new_window=true]. This will allow you to peel away the plastic liners and expose the adhesive without losing alignment.
+[* black] Hold the exposed strip by its tabs and carefully line up a long edge of the adhesive to the edge of the back cover.
+[* black] Set the adhesive onto the back cover and press it firmly onto the surface with your fingers.
+[* black] Peel away the colored liner from the perimeter adhesive strip to expose the adhesive.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi