Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove the adhesive liner
-[* icon_note] Generally, adhesives strips have a colored side and a non-colored (paper or clear plastic) side. ***The non-colored side should be applied first. ***Before you peel any liners, determine the surface that the non-colored side lines up with.
+[* icon_note] Generally, adhesives strips have a colored side and a non-colored (paper or clear plastic) side. ***The non-colored side determines which surface the strip should be applied to first.***
+[* black] Before you peel any liners, locate the surface the non-colored side should stick to.
+ [* black] To make adhesive application easier, you can align the strip to its intended position on the phone, [https://d3nevzfk7ii3be.cloudfront.net/igi/WUXP4Wk5iqub5PEF.large|then tape one edge down to hold the strip in place|new_window=true]. This will allow you to peel away the liners and expose the adhesive without losing alignment.
[* black] Once you have a good idea how the adhesive strip fits on the surface, peel the non-colored liner off.
[* icon_note] If you are applying a back cover or screen adhesive, you may need to peel out the unnecessary center portion of the adhesive strip.
- [* black] Carefully peel away the center portion of both the white (paper) and black (adhesive) layers, starting with the U-shaped cutout.
+ [* black] Carefully peel away the center portion of both the white (paper) and black (adhesive) layers, [https://d3nevzfk7ii3be.cloudfront.net/igi/MooIq3wXf33HLMWs.large|starting with the U-shaped cutout|new_window=true].
[* black] Peel off and discard the remaining paper liner, exposing the adhesive underneath.