4. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove the adhesive liner | |
| - | [* icon_note] Generally, adhesives strips have a colored side and a non-colored (paper or clear plastic) side. ***The non-colored side |
| + | [* icon_note] Generally, adhesives strips have a colored side and a non-colored (paper or clear plastic) side. ***The non-colored side of the strip should be applied first.*** |
| [* black] Before you peel any liners, locate the surface the non-colored side should stick to. | |
| [* black] To make adhesive application easier, you can align the strip to its intended position on the phone, [https://d3nevzfk7ii3be.cloudfront.net/igi/WUXP4Wk5iqub5PEF.large|then tape one edge down to hold the strip in place|new_window=true]. This will allow you to peel away the liners and expose the adhesive without losing alignment. | |
| [* black] Once you have a good idea how the adhesive strip fits on the surface, peel the non-colored liner off. | |
| [* icon_note] If you are applying a back cover or screen adhesive, you may need to peel out the unnecessary center portion of the adhesive strip. | |
| - | [* black] Carefully peel away the center portion of both the white (paper) and black (adhesive) layers, [https://d3nevzfk7ii3be.cloudfront.net/igi/MooIq3wXf33HLMWs.large|starting with the U-shaped cutout|new_window=true]. |
| + | [* black] Carefully peel away the center portion of both the white (paper) and black (adhesive) layers, [https://d3nevzfk7ii3be.cloudfront.net/igi/MooIq3wXf33HLMWs.large|starting with the U-shaped cutout (if present)|new_window=true]. |
| [* black] Peel off and discard the remaining paper liner, exposing the adhesive underneath. |