Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Hold the exposed strip by its tabs and carefully line up a long edge of the adhesive to the edge of the back cover.
- [* icon_note] To make adhesive application easier, you can align an unexposed strip to its intended position on the phone, [https://d3nevzfk7ii3be.cloudfront.net/igi/a6EfdSi3YTRDsMVw.large|then tape one edge down to hold the strip in place|new_window=true]. This will allow you to peel away the plastic liners and expose the adhesive without losing alignment.
+ [* icon_note] To make adhesive application easier, you can align an unexposed strip to its intended position on the phone, then tape one edge down to hold the strip in place. This will allow you to peel away the plastic liners and expose the adhesive without losing alignment.
[* black] Set the adhesive onto the surface and press it firmly onto the surface with your fingers.
[* black] Peel away the colored liner from the adhesive strip to expose the adhesive.
[* icon_note] Some adhesive strips may have a clear cling-wrap on top of the colored liner. Peel this off when you remove the colored liner.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi