13. Adımdaki Değişiklikler
Düzenleyen: Ryan Dionne —
Düzenleme onaylandı tarafından Ryan Dionne
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Adjust the front |
|---|---|
| + | [* red] Adjust the front 1.5 mm flat head prism screws with small turns. |
| [* black] Look through the binoculars after each adjustment to see if it is aligning the vision, and repeat the adjustments until it is repaired. | |
| + | [* icon_note] You may need to return to Step 8 to fine-tune the other set of screws. All four prism adjustment screws must be in their correct positions to produce the correct view through the binoculars. |