8. Adımdaki Değişiklikler
Düzenleyen: Ryan Dionne —
Düzenleme onaylandı tarafından Ryan Dionne
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Adjust the prism screws as needed. |
|---|---|
| - | [* black] Note: if adjusting these screws does not align the vision, proceed to Step 9. If the vision is repaired, you can stop at this step. |
| + | [* black] Adjust the 2 mm prism screws with small turns of the driver. |
| + | [* icon_note] Note: if adjusting these screws does not align the vision, proceed to Step 9. If the vision is repaired, you can stop at this step. |
| + | [* icon_caution] DO NOT tighten the prism screws too much, or you will crack the prism and permanently destroy it. Repairing or replacing the prism is beyond the scope of this guide. |