8. Adımdaki Değişiklikler
Düzenleyen: Ryan Dionne —
Düzenleme onaylandı tarafından Ryan Dionne
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Adjust the 2 mm prism screws by slightly turning the driver. |
|---|---|
| + | [* black] Adjust the 2 mm flat head prism screws by slightly turning the driver. |
| [* icon_note] Note: Look through the binoculars after each turn, and if the vision is aligned, you can stop at this step. If adjusting these screws does not align the vision, proceed to Step 9. | |
| [* icon_caution] DO NOT tighten the prism screws too much, or you will crack the prism and permanently destroy it. Repairing or replacing the prism is beyond the scope of this guide. |