Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

8. Adımdaki Değişiklikler

Düzenleyen: Mike B

Düzenleme onaylandı tarafından Mike B

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Once you see the body and sander plate are back together, sander plate should not be touching, and bearing more or less flush. Sanity check by turning it around a little.
[* black] Re-assembe in reverse orderorder, starting with the bottoms bearing shaft screw.
[* black] Re-assembe in reverse orderorder, starting with the bottoms bearing shaft screw.
[* black] Add some silicone spray to nylon sandpaper locking levers. Move around a little.
[* black] CleanClean oil/grease off, check for (electric) safety issues.
[* black] CleanClean oil/grease off, check for (electric) safety issues.
[* black] Plug in
[* black] Test.
[* black] Celebrate, you saved the planet, saved some money, achieved something fun and deserve a beer.