Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi —

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] The first thing to go from the inside of the Mate 30 Pro is the plastic frame carrying the flash unit, the orange NFC antenna cable and the wireless charging coil. The whole assembly comes out with just a few flicks and swishes of our [product|IF145-419-1|Precision Bit Driver|new_window=true].
-[* black] With the plastic frame out of the way we remove a strangely Y-shaped interconnect cable that runs directly from the USB-C port to the main board on the left and the smaller mic / accessory board in the lower right corner of the phone.
+[* black] With just a few flicks and swishes with our [product|IF145-419-1|precision bit driver|new_window=true], we remove the classic plastic combo frame: flash, NFC coil, and a wireless charging coil.
+[* black] With the frame out of the way, we extract a strangely Y-shaped interconnect cable that ... interconnects the USB-C port, motherboard, and accessory board together.