Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Philippe Naviaux

Düzenleme onaylandı tarafından Philippe Naviaux

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Place laptop upside down with the hinge facing you, then remove the two 9mm Phillips #0 screws located in the center of the rear panel. Remove the rear panel by using the iFixit opening tool to separate it from the back of the laptop.
+[* red] Place laptop upside down with the hinge facing you, then remove the two 9mm Phillips #0 screws located in the bottom left and right of the of the rear panel. Remove the rear panel by using the iFixit opening tool to separate it from the back of the laptop.