Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Place laptop upside down with the hinge facing you, then unscrew the two 9mm Phillips head screws located in the center of the rear panel. Remove the rear panel by using the pry tool to separate it from the back of the laptop.
+[* red] Place laptop upside down with the hinge facing you, then remove the two 9.0 mm Phillips #0 screws located in the center of the rear panel. Remove the rear panel by using the iFixit opening tool to separate it from the back of the laptop.