1. Adımdaki Değişiklikler
Düzenleyen: Jacob Lowell —
Düzenleme onaylandı tarafından Jacob Lowell
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Place laptop upside down with the hinge facing you, then remove the two 9.0 mm Phillips #0 screws located in the center of the rear panel. Remove the rear panel by using the iFixit opening tool to separate it from the back of the laptop. |
|---|---|
| + | [* red] Place laptop upside down with the hinge facing you, then remove the two 9.0 mm Phillips #0 screws located in the center of the rear panel. |
| + | [* black] Remove the rear panel by using the iFixit opening tool to separate it from the back of the laptop. |
| + | [* black] Be sure to use your Anti-Static wrist strap for this process. Hard drives are susceptible to static damage! |