Garmin Edge 1000 Back Cover Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Russell Webster — 26 Kas 2019

Düzenleme onaylandı tarafından Russell Webster

	[* icon_caution] Be sure the device is properly powered all the way OFF before starting the replacement.
-	[* ~~black~~] Hold the Edge 1000 front side down. Using the T6 torx 4 mm bit attached to the flex extension, unscrew the 8 screws along the backside of the Edge 1000.
+	[* red] Hold the Edge 1000 front side down. Using the T6 torx 4 mm bit attached to the flex extension, unscrew the 8 screws along the backside of the Edge 1000.
	[* black] Pull the front side of the Edge 1000 apart from the back side.