Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi —

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] Be sure the device is properly powered all the way OFF before starting the replacement.
-[* red] Hold the Edge 1000 front side down. Using the T6 torx 4 mm bit attached to the flex extension, unscrew the 8 screws along the backside of the Edge 1000.
-[* black] Pull the front side of the Edge 1000 apart from the back side.
+[* icon_caution] Be sure the device is properly powered all the way off before starting the replacement.
+[* red] Hold the device front side down. Remove the eight T6 Torx screws along the backside of the device.
+[* black] Pull the front side of the device apart from the back side.