Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the single 3.6mm Phillips screw with a #00 Screwdriver on the left side of the camera
-[* black] Open the remote / DC in rubber flap to reveal 1 screw.
-[* orange] Remove the single 4.3mm Phillips screw with a #00 Screwdriver.
+[* red] Using a Phillips #00, remove the single 3.6mm Phillips screw on the left side of the camera.
+[* black] Open the remote / DC under the rubber flap to reveal one screw.
+[* orange] Using the Phillips #00 remove the single 4.3mm screw.