Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Micah Fitzgerald

Düzenleme onaylandı tarafından Micah Fitzgerald

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use the opening tool to peel down the rubber grip around the handle at least 1 cm.
+[* black] Use the plastic opening tool to peel down the rubber grip around the handle at least 1 cm.
[* icon_note] The adhesive holding the rubber grip down should be strong enough to reattach when you are done. If not, you may need an adhesive to reglue it.
[* red] Remove one 3mm JIS 000 screw from underneath the rubber grip on the right side.
[* orange] Remove one 4mm JIS 000 screw from the left side.