| + | [* black] Locate the two screws on the back face of the Sega Saturn holding the power socket in place. |
|---|
| + | [* black] These screws are very tight and easy to strip, so press firmly and carefully when unscrewing the screws counter-clockwise, using the SANDOFF head. |
|---|
| + | [* black] Locate the screw holding down the power supply board. |
|---|
| + | [* black] Unscrew the screw counter-clockwise, using the J1 head on the screwdriver. |
|---|
| + | [* black] Locate the pins that hold the power supply board firmly in place to the motherboard below. They are located towards the front face of the sega saturn and will require some force to unplug. |
|---|
| + | [* black] Focusing on the front of the power supply board, pull the power supply board upwards, sometimes shaking lightly to loosen the grip of the pins on the board. |
|---|
| + | [* black] While holding the power supply board, use the plastic pryer to push the plastic resting tray’s pin located here. |
|---|
| + | [* black] Remove the plastic resting tray to free the wire between the power supply board and the button. |
|---|