Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Phryne

Düzenleme onaylandı tarafından Phryne

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Disassemble The Dot Projector
[* black] Insert wisdomThe outer layer of the dot projector is sealed with resin and protected by metal welding techniques. Pay attention to these welding points. They can easily fall off once the phone is dropped. And once off, they cannot be restored.
[* black] When disassembling, we need to cut open the outer metal cover at first. Then heat with the Hot Air Gun and remove the resin with tweezers.
[* black] Once the dot projector has been detached, we can see a crystal that looks just like a diamond lens. The infrared light is emitted from
here. Then reflected by the crystal. Its projection range is determined by the lens afterwards.
[* black] Insert wisdomThe outer layer of the dot projector is sealed with resin and protected by metal welding techniques. Pay attention to these welding points. They can easily fall off once the phone is dropped. And once off, they cannot be restored.
[* black] When disassembling, we need to cut open the outer metal cover at first. Then heat with the Hot Air Gun and remove the resin with tweezers.
[* black] Once the dot projector has been detached, we can see a crystal that looks just like a diamond lens. The infrared light is emitted from
here. Then reflected by the crystal. Its projection range is determined by the lens afterwards.

Resim 1

Önceki resim yok

Eklendi