Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[title] Disconnect the display + front sensors
-[* icon_caution] ***Please check if these cables are correctly identified. Edit the step title as needed.***
-[* black] Use the point of a spudger or a fingernail to disconnect the front panel sensor assembly connector.
-[* black] Use the point of a spudger or a fingernail to disconnect the OLED display assembly connector.
+[title] Disconnect the front sensors + digitizer
+[* black] Use a spudger or a fingernail to disconnect the front sensor assembly cable connector.
+[* black] Use a spudger or a fingernail to disconnect the digitizer cable connector.
+ [* icon_reminder] If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.