Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Walter Galan —

Düzenleme onaylandı tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use the flat end of a spudger to pry the outboard side of the I/O board data cable up from its socket on the I/O board.
-[* icon_caution] Be careful to pry evenly, and against the AirPort socket, not the AirPort board, to prevent damaging the board.
+[* black] Use the flat end of a spudger to pry the right side of the I/O board data cable connector up off its socket on the I/O board.
+[* icon_caution] When prying the I/O board data cable connector from its socket, make sure to pry the connector itself and not the socket. Prying the socket may cause irreversible damage to the I/O board.