1. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
Düzenleme onaylandı tarafından Walter Galan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] With the flat end of a spudger, pry the headphone jack cable's connector straight up from its socket on the logic board. |
|---|---|
| - | [* black] Gently bend the microphone cable to 90° up from the logic board. |
| + | [* black] Use the flat end of a spudger to pry the headphone jack cable connector straight up off its socket on the logic board. |
| + | [* icon_note] Gently bend the headphone jack cable to 90° up from the logic board. |
| + | [* icon_reminder] Bending the headphone jack cable will allow you to disconnect the left speaker cable connector without having the headphone jack cable in the way. |