Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Victoria Yates

Düzenleme onaylandı tarafından Victoria Yates

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Thread the shift cable back into the derailleur, pull it tight and tighten the anchor bolt so the cable flattens. Then find a bare stretch of cable and give it a good pull to make sure the cable is seated and has no slack. Then loosen the cable, pull it tight again and re-tighten it.
+[* black] Now turn your bike upside down and change the gears.
+ [* black] While changing gears if you have to force them to change, the derailleur was put on incorrectly. The casing for your cables can break.
+ [* black] Run through the entire range of rear sprockets to make sure the chain does not rub on either side of the front derailleur cage.