Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: TheFixaholic

Düzenleme onaylandı tarafından TheFixaholic

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Disconnecting Cables Part 1
[* black] Take the prying tool and carefully lift the metal clip on the flat connector above the right hinge.
[* black] Now pull it backwards and out
[* black] Finally disconnect all antenna cables found (2 or 4, depending on your specs)
[* black] Disconnect them by either prying them off with the plastic tool or pulling upwards ''carefully'' from the cable itself.
- [* black] Now carefully pry them out of their latches.